pH / ORP / ISE
pH / ORP / ISE
Overview
Coming soon.
Probes – pH / ORP
- Transmitter and Wiring Instructions
Transmitter and wiring instructions for a range of transmitters. - Probe Part Numbers
Industrial Precision Instruments' probes are formulated to specifically meet our customer's needs, ensuring longevity, performance, accuracy and reliability with minimum maintenance. The design specifications are included in our part numbers. - Budget Industrial Probes
Designed for general purpose, this ryton probe with hose tail is a quality solution for water or general chemical applications. - Retractable Probes
3/4" Industrial probe fitted to a retractable stainless steel insertion tube, passing through a double or single ball valve assembly with a safety drain welded into the expansion chamber. - Twist Lock Sensors
Convenient Twist Lock Sensors (with mating rugged inline receptacles) are perfect for high maintenance pH, ORP applications requiring frequent cleaning or calibration. Twist Lock sensors are also well suited to tricky Ion Selective measurement requiring periodic calibrations. - Immersion Probes
Rugged line of 3/4" -3/4" & 3/4" - 1" MNPT pH & ORP sensors for in-line and standpipe applications. Available in slurry / viscous, sulphide, high temperature, cyanide, organic applications and many other difficult process applications. IPI sensors are manufactured in the US and their high quality ensures they are unsurpassed in any mining applications.
Probes – ISE / Conductivity
- Transmitter and Wiring Instructions
Transmitter and wiring instructions for a range of transmitters. - Probe Part Numbers
Industrial Precision Instruments' probes are formulated to specifically meet our customer's needs, ensuring longevity, performance, accuracy and reliability with minimum maintenance. The design specifications are included in our part numbers. - ISE Sensors
Industrial Ion Selective Electrodes (ISE) Sensors for all industrial waste-monitoring applications. Used to check the treatment levels. - AST40 and AST42
The Model AST40 sensor has been designed for a wide measurement range in difficult process conditions. It can be installed in submersion, insertion, or wet-tap configurations, and is good for most applications from high purity water to high chemical concentrations. - AST41
The Model AST41 sensor was designed for high pressure, high temperature conductivity measurements, and is an ideal choice for boiler control applications. Blowdown control, condensate monitoring, leak detection on heat exchangers, and steam purity measurements are just a few of the many applications in which this rugged and reliable sensor can be used. - ASTXX-TRI
The AST10, AST51 and AST52 sensors are welded to blind flanges of customer specified size, and can then be inserted into standard tee fittings in sanitary systems using fittings by Ladish or Alfa-Laval Tri-Clover. - AST10 and AST51
The AST10 and 51 sensors offer a compact design that allows installation into standard pipe fittings in small line sizes such as 3/4" and 1", avoiding the need for special flow cells. Simplicity of the design also allows them to be economically offered in exotic metals for especially corrosive chemical applications. - AST52
This sensor has a small footprint for its high cell constant of 10.0. Its size and economical pricing make it ideal for use ins OEM applications, such as skid mounted R.O. systems, water treatment units, chemical dilutions, and many more. - AST50/AST60
These sensors are designed for use in general purpose applications up to about 50,000 microsiemens, and provide outstanding chemical resistance. Open front end geometry resists clogging and reduces maintenance requirements to a minimum.
Transmitters
- IPI-ASTI 4TX
4TX 240 Volt Transmitter for pH, ORP and Temperature Measurements - IPI-ASTi 2TX
Reliable & Affordable Isolated 2-Wire Loop Powered pH & ORP Transmitter - PT91 Industrial
A wall mounted unit designed for pH, ORP & ISE sensors. - Rosemount 54e
Model 54e pH, ORP, Ion Selective Analyzer, Controller & 4-Wire Transmitter - Rosemount 5081
Model 5081 pH & ORP Transmitter, Analyzer, Controller - Rosemount 1056
Model 1056 Single & Dual Channel pH, ORP & Ion Selective (ISE) 4-Wire Transmitter & Analyzer
Lab Equipment
- Jenco 6308C Conductivity Analyser
Improve quality control, reduce process downtime, enhance research and development, meet regulations, all while keeping cost low. - Jenco 6311 Analyser
The Jenco 6311 is a high quality analyser, used to measure, analyze and control pH, ORP and temperature
SS Fittings & Accessories
- Transmitter and Wiring Instructions
Transmitter and wiring instructions for a range of transmitters. - Dissolved Oxygen Meter Spare Parts
Please call our sales consultants for more information or to place an order for anything from our spare parts range. - Retractable Ball Valve Assemblies
Industrial Precision Instruments custom manufactures and modifies Retractable Ball Valves for specific applications: depth, rating, insertion length and tank configurations. - Cabinets
Industrial Precision Instruments has a wide range of cabinets to enclose and protect transmitters available in an array of shapes, sizes and materials. - Stainless Steel Insertion Tubes
Exclusive to Industrial Precision Instruments, our range of stainless steel insertion tubes have been designed to make the use and replacement of our probes easier than ever.