AST50/AST60
AST50
These sensors are designed for use in general purpose applications up to about 50,000 microsiemens, and provide outstanding chemical resistance. Open front end geometry resists clogging and reduces maintenance requirements to a minimum.
Application Notes
Wetted materials of construction are CPVC or Teflon/Kynar, with 316SS electrodes as standard. The option to select other metals as electrode materials provides an unequalled chemical resistance capability.
Dual O-ring seals of EPDM increase sensor reliability and service life. The front seal absorbs the brunt of chemical attack, allowing the rear o-ring to Double threaded body can be used for either submersion or insertion O-ring seals used on all versions for high on-stream reliability
Can be used with many instrument brands by specifying proper TC operate in a protected environment, and insure continued sealing. Cell constants from 0.1 to 2.0 are available. The ranges that can be achieved with these constants is dependent on the analyzer they are used with, but 10 to 50,000 μS is the
approximate area of use. TC selection is the key to using these sensors effectively with a variety of instruments.