Immersion Probes « IPI Instrumentation

Overview
IPI-ASTI Probes offer unique solutions for process measurement problems:

Best reference lifetime in process industry through nonporous cross linked conductive polymer
Rugged industrial grade sensors can operate in a temperature range from -30 to 150 degrees Centigrade
Application Specific pH glasses service processes such as such as acid/fluoride, saturated sodium, ultrapure water, cyanide, sulfide, high / ultra high temperature, slurry/viscous materials, paper and pulp
Each standard sensor selection and/or special sensor design are based upon customer application information
Wide range of plastic housing configuration from inexpensive CPVC/PVC, General Purpose RYTON, to the extremely chemically & thermally resistant UltemTM (PEI) and PEEK

Supported Meters

Replacement Sensors
REQUIRING
Integrated
Preamplifiers

Instruments with preamplifiers are supplied with the
appropriate internal temperature compensation, solution ground & integrated
(embedded) OEM compatible high-impedance CMOS operational amplifiers
(a.k.a. preamplifiers). Not that some manufacturers can support
sensors with or without preamplifiers on the same meter. Appropriate
sensor hook-up schematics are provided with each sensor, and can
be found this web site.

Replacement Sensors
NOT
REQUIRING Integrated
Preamplifiers

Instruments without preamplifiers are supplied with the
appropriate internal temperature compensation and/or solution ground signals.
Appropriate sensor hook-up schematic are provided with each
sensor, and can be found here.

Fully
Supported Hardware

Electro-Chemical Devices (100%
Compatible, FULL SUPPORT)
T-20, T-21, T-27, T-28, T-29,
T-30, C-22

Foxboro (100% Compatible, FULL SUPPORT)
870IT , 873, 873DPX,
875IT

Jenco (100% Compatible, FULL SUPPORT)
6311

Leeds and Northrup (Honeywell)
(100% Compatible, FULL SUPPORT)
7030, 7075, 7076, 7079, 7081,
7082 , 7083, 7084, 7096, 9782

Uniloc-Rosemount (100% Compatible,
FULL SUPPORT)
1000, 1001, 1002, 1003, 1050,
1181 , 1054, 1054A,
1054B, 1055, 2081, 3081, 81,
54pH/ORP, 54e, 5081, XMT

Fully
Supported Hardware

Endress+Hauser (100%
Compatible, FULL SUPPORT)
CPM 223/253, CPM 152, CPM 153, CPM
280, CPM 431

Mettler Toledo – Ingold (100%
Compatible, FULL SUPPORT)
1120, 1140, 2050, 2100, 2220, 2400, 2500, 2800X

M700,
pH 1140, pH 2050e, pH 2100-PA, pH 2100e

TBI-Bailey Controls (100%
Compatible, FULL SUPPORT)
TB515, TBN580,
TB701/702, TB82pH, TB84pH
4630,
4631, 4635, 4636, AX416, AX436, AX468, AX460, AX466

Supported Hardware
with Known issues

Uniloc-Rosemount (Limited Compatability,
Some Known Issues)
1054, 1054A
& 1054B

Great Lakes Instruments (Most models
supported, Some minor known issues)
33, 53, 60, 62, 63, 70, 83,
90, 95, 570, 670
671, 690, 691, 692,
P33, P53, P63, Pro-Series P3

Signet (Limited Compatability,
Some Known Issues)
710 et. al., 2720, 9030,
9040, 8710, 8750, 5700

IC Controls (Limited Compatibility,
Some Known Issues)
650,
652, 653, 653-9, 654, 655,
656, 657

Aquametrix (Most models
supported, Some minor known issues)
SHARK, 2200P,
2200R

Supported
Hardware
with Known issues

Johnson Yokogawa (Limited Compatibility,
Some Known Issues)
pH/ORP 200, pH/ORP
400, pH/ORP 202, pH/ORP 402
pH150,
pH100, OR100

PLEASE INQUIRE FOR ANY INSTRUMENTATION NOT LISTED

Applications

Standard Applications

Acid/Fluoride
High / Ultra High Temperature
Paper/Pulp
Slurry/Viscous Materials
Saturated Sodium
Oxidation Reduction Potential
Sulfides
Ultrapure Water
General Purpose

Special Applications

Organic Solvents Resistant
Cyanide Resistant
Dissolved Gases:
Cl₂, ClO₂, NH_3,SO₂ / SO₃ / NO_X Resistant

View selected pH, ORP & Ion Selective
Measurement and Control Case Studies (Application Bulletins)

LIMITS &
CAPABILITIES (PARTIAL LIST ONLY)

pH & ORP
MEASUREMENTS

Fluorides up
to 50,000 PPM and -0.5 pH
Sulfides
up to Saturation
Cyanides
up to 500 PPM
High pH
range up to 14.5 (with
ASTI calibration procedures and buffers)
Low pH
range up to -0.5 (with ASTI calibration procedures and buffers)
Low
Temperature up to -30 ^oC
High
Temperature up to 150 ^oC
High
Pressure up to 150 p.s.i.
Solids
Content up to 12% Consistency Pulp
Almost
All Organic Chemical Mixtures (Minimum 1-2 % aqueous
content)
ORP Measurements
in Completely Non-Aqueous Medium
Bleaching Applications using Chlorine and Chlorine
Dioxide
Sterilization
Applications using Peroxide, Ozone & Dissolved O₂

PLEASE INQUIRE FOR ANY APPLICATIONS NOT LISTED HERE

Body Configurations

Immersion Sensors
3/4″ – 3/4″ MNPT Immersion Bodies	Available in:	3/4″ – 1″ MNPT Immersion Bodies	Available in:
	Standard, ULTEM (PEI) body 6X32 Series ULTEM Chemical Resistance Chart Drawing <6-5> (pH Bulb) Drawing <6-5-Pt> (ORP- Platinum Band) Drawing <6-6> (Flat pH Element)		General Purpose RYTON (PPS) body 6X51 & 6X52 Series RYTON Chemical Resistance Chart Drawing <6-1> (pH Bulb) Drawing <6-1-Pt> (ORP- Platinum Band) Drawing <6-2> (Flat pH Element)
	Extreme Application, PEEK body 6X42 Series PEEK Chemical Resistance Chart Drawing <6-5> (pH Bulb) Drawing <6-5-Pt> (ORP- Platinum Band) Drawing <6-6> (Flat pH Element)		Standard, ULTEM (PEI) body 6X31 Series ULTEM Chemical Resistance Chart Drawing <6-1> (pH Bulb) Drawing <6-1-Pt> (ORP- Platinum Band) Drawing <6-2> (Flat pH Element)
	CPVC body, General Purpose 6X12 Series (C)PVC Chemical Resistance Chart Drawing <6-5> (pH Bulb) Drawing <6-5-Pt> (ORP- Platinum Band) Drawing <6-6> (Flat pH Element)		Extreme Application, PEEK body 6X41 Series PEEK Chemical Resistance Chart Drawing <6-1> (pH Bulb) Drawing <6-1-Pt> (ORP- Platinum Band) Drawing <6-2> (Flat pH Element)
	CPVC body, Inexpensive 6X11 Series (C)PVC Chemical Resistance Chart Drawing <6-3> (pH Bulb) Drawing <6-3-Pt> (ORP- Platinum Band) Drawing <6-4> (Flat pH Element)
PICTURE COMING SOON	CPVC body, Low Cost 2X12 Series (C)PVC Chemical Resistance Chart Drawing <6-9> (pH Bulb) Drawing <6-9-Pt> (ORP- Platinum Band) Drawing <6-10> (Flat pH Element)

Selection Guide

Iotron ^TM Sensor
Selection Guide

3/4″-1″ MNPT
Sensor Body Housing Configuration

Sensor Description	RYTON	RYTON	ULTEM	PEEK
General Purpose	6052 (Specs)	6051 (Specs)	6031 (Specs)	6041 (Specs)
High & Low Temperature	Not Available	Not Available	6131 (Specs)	6141 (Specs)
Ultra High / Low Temperature	Not Available	Not Available	Not Available	6241 (Specs)
Slurry Viscous Material	6352 (Specs)	6351 (Specs)	6331 (Specs)	6341 (Specs)
Acid/ Fluoride Resistant	6452 (Specs)	6451 (Specs)	6431 (Specs)	6441 (Specs)
Paper/ Pulp Resistant	Not Available	6551 (Specs)	6531 (Specs)	6541 (Specs)
Sulfide Resistant	Not Available	6651 (Specs)	6631 (Specs)	6641 (Specs)
Ultrapure Water	Not Available	6751 (Specs)	6731 (Specs)	6741 (Specs)
*ORP*	6852 (Specs)	6851 (Specs)	6831 (Specs)	6841 (Specs)
Saturated Sodium Resistant	6952 (Specs)	6951 (Specs)	6931 (Specs)	6941 (Specs)

Iotron ^TM Sensor
Selection Guide

3/4″-3/4″ MNPT
Sensor Body Housing Configuration

Sensor Description	CPVC	CPVC	CPVC	ULTEM	PEEK
General Purpose	2012 (Specs)	6011 (Specs)	6012 (Specs)	6032 (Specs)	6042 (Specs)
*High Temperature*	Not Available	Not Available	Not Available	6132 (Specs)	6142 (Specs)
Ultra High Temperature	Not Available	Not Available	Not Available	Not Available	6242 (Specs)
Slurry Viscous Material	2312 (Specs)	6311 (Specs)	6312 (Specs)	6332 (Specs)	6342 (Specs)
Acid/ Fluoride Resistant	2412 (Specs)	6411 (Specs)	6412 (Specs)	6432 (Specs)	6442 (Specs)
Paper/ Pulp Resistant	Not Available	Not Available	6512 (Specs)	6532 (Specs)	6542 (Specs)
Sulfide Resistant	Not Available	Not Available	6612 (Specs)	6632 (Specs)	6642 (Specs)
Ultrapure Water	Not Available	Not Available	6712 (Specs)	6732 (Specs)	6742 (Specs)
*ORP*	2812 (Specs)	6811 (Specs)	6812 (Specs)	6832 (Specs)	6842 (Specs)
Saturated Sodium Resistant	2912 (Specs)	6911 (Specs)	6912 (Specs)	6932 (Specs)	6942 (Specs)

Sensor Options

Immersion & Twist
Lock Sensor Options

All Immersion sensors come standard with protective
tines (guard).
Protective tines (guard) can be removed at no additional charge (“NG”
option)
All Twist Lock sensors come standard without protective
tines (guard).
Protective tines (guard) can be added at no additional charge (“GR”
option)
All Immersion and Twist Lock sensors can have the
waterproofing option added for subemrsible sensor installations
Link
to Submersible Assemblies
(with WaterProofing Option)
All sensors may be mounted from either front or rear
MNPT
threading
Sensors can be mounted with a pipe stand for immersion
installations or flow-through tee
configuration for inline installations
Fast
temperature compensation response may be desired for some inline flow
cell installations with variable temperature conditions (Iotron^TM
AccuTemp^TM)

THE COMPLETE ASTI
PART NUMBERING GUIDE

APPENDIX “A”

Custom Applications	Add-On Alpha Prefix
Dissolved Chlorine Gas	“C”
Dissolved Ammonia Gas	“A”
Organic Media Applications	“L”
Teflon Silicone Required*	“TS”
Triple Junction*	“TJ”
Position Insensitive Assembly*	“H”
Mid-Level HF Resistant	“MF”
High-Level HF Resistant	“HF”
Accu-Temp Option for Fast Temperature Response*	“X”
Low Impedance Option	“GP”
Custom Configurations	Add-On Alpha Prefix
Removal of Sensor Guard (For Immersion or Valve Retractable Series Only)	“NG”
Additional of Sensor Guard (for Twist Lock Series Only)	“GR”
Solution Ground Addition (Indicated for Sensors Without Preamplifiers Only)*	“Y”

* Additional Charges may apply for these options.

IPI Instrumentation

Contact Us

About Us

Email Us

Call Us

More Info